Forged washer head bolts are used in the pole line industry and provide increased bearing surface on the crossarm due to the integrated washer that is forged under the square head. They are commonly used with square nuts and are hot-dip galvanized to prevent corrosion. Standard thread lengths for pole line fasteners, which are longer than standard bolts, are applied to washer head bolts. A semi-cone point is added to the threaded end to facilitate easy installation.
Manufacturing
Portland Bolt manufactures washer head bolts from 1/2″ diameter through 7/8″ diameter. These bolts are manufactured to ASTM specification A307 grade A. They are forged with a square head and a large washer surface under the head. All processes including hot-dip galvanizing, are performed in-house.
Washer Head Bolt Dimensions
| Bolt Diameter | D | H | W | B | C | F | |||
|---|---|---|---|---|---|---|---|---|---|
| Body Diameter | Height (Head) | Height (Washer) | Outside Diameter (Washer) | Width Across Corners (Head) | Width Across Flats (Head) | ||||
| Max | Min | Basic | Max | Min | |||||
| 1⁄2 | 0.515 | 0.290 | 0.130 | 1.40 | 1.061 | 0.995 | 3⁄4 | 0.750 | 0.725 |
| 5⁄8 | 0.642 | 0.420 | 0.125 | 1.80 | 1.326 | 1.244 | 15⁄16 | 0.938 | 0.906 |
| 3⁄4 | 0.768 | 0.490 | 0.110 | 2.20 | 1.591 | 1.494 | 11⁄8 | 1.125 | 1.088 |
| 7⁄8 | 0.895 | 0.640 | 0.180 | 2.60 | 1.856 | 1.742 | 15⁄16 | 1.312 | 1.269 |
We are the Industry Experts
It's no secret that we are known as experts in the fastener industry and have been since 1912. our devotion to customer service, quality products, and on-time deliveries have propelled us to success since our inception.
Request a Quote Browse Products